Every measurement you need before ordering the walnut & black faux leather swivel office chair — the original dimension drawing, every number in inches and centimeters, and a 4-step desk-fit checklist. $489.89 (compare at $756.21) with free US shipping and 30-day returns.
Quick answer: the seat adjusts from 18 in to 22 in high (46–56 cm), which fits any standard 28–30 in desk. Overall it stands 31.1–35.1 in tall (79–89 cm) on a 21.1 in-deep footprint, and the armless seat tucks completely under most desk aprons.
Dimensions
| Overall Height | 31.1 – 35.1 in / 79 – 89 cm (gas lift, +4 in) |
| Seat Cushion Height | 18 – 22 in / 46 – 56 cm |
| Seat Width | 18.9 in / 48 cm |
| Seat Depth | 15.7 in / 40 cm |
| Overall Depth | 21.1 in / 54 cm |
| Backrest Setback from Seat Front | 5.3 in / 13.5 cm (open lumbar gap) |
| Weight | 24.3 lb / 11 kg |
| Base | Five-star black steel, 5 × 360° swivel casters |
The number that matters most is the seat range: 18–22 in covers everyone from about 5'2" to 6'3" at a standard desk. Shop the swivel office chair →
Desk Fit at a Glance
| Standard desk (28–30 in) | Counter-height desk (34–36 in) | Floating desk / console | |
| Seat setting | 18–20 in | Not recommended | Match: desk height minus 10–11 in |
| Tucks fully under? | Yes — armless, the seat needs only 18.9 in of width; the low back rises just above the desktop | — | Yes — seat slides under the slab; check knee clearance against slab thickness |
| Knee clearance | ~8–10 in between seat and desktop | — | Depends on slab thickness |
Will It Fit? The 4-Step Checklist
- 1. Measure your desk height. Floor to desktop: 28–30 in is the sweet spot. Set the seat 10–11 in below the desktop for relaxed shoulders and flat forearms.
- 2. Check under-desk clearance. The chair needs 18.9 in of width and 21.1 in of depth to tuck away completely — no armrests means no collision with drawers or aprons.
- 3. Confirm your floor. The dual-wheel casters roll on hardwood, tile, and low-pile carpet; on delicate floors add a desk mat, as with any caster chair.
- 4. Give the swivel its circle. Allow roughly a 24 in radius from the base center so a full turn never clips a wall or bed frame — this chair is made for tight bedroom offices, but it still likes room to spin.
Frequently Asked Questions
What desk height does an 18–22 in seat range fit?
Any desk from about 28 to 32 in. The classic rule is seat height = desk height minus 10–11 in, so at the chair's 22 in maximum you can comfortably work at a 32 in surface.
Is it small enough for a bedroom office corner?
Yes — that's its natural habitat. The 21.1 × 18.9 in footprint is closer to a dining chair than a task chair, and with no armrests it disappears under the desk after hours. See it styled in our 4-look home-office styling guide.
How tall is the backrest?
The shell supports to mid-shoulder for most adults: overall height is 31.1–35.1 in, with the tufted back panel floating above a 5.3 in open lumbar gap that keeps summer sitting cool.
Does it match the walnut on the lounge chair & ottoman?
Yes — the seat and back shells use the same dark-walnut veneer laminate as our mid-century lounge chair & ottoman, so the two read as a set in the same room.
Measured up? The walnut & black leather swivel office chair is in stock — $489.89, free US shipping, 30-day returns.
