Product dossier · USM Haller style coffee table

USM Haller Coffee Table Dimensions for Mid Century Living Room

Every measurement of our USM Haller style coffee table in one place: the dimension and materials drawings, the clearances inside the frame, the three finishes and how the table sits in a mid-century living room.

Width30.5in77.5 cm
Depth20.6in52.3 cm
Height14.7in37.3 cm
USM Haller style coffee table in Graphite Black with a chrome-plated steel frame and brass ball connectors
Graphite Black (RAL 9011), studio render.
Quick answer: the table measures 30.5 in wide, 20.6 in deep and 14.7 in high (77.5 × 52.3 × 37.3 cm). Inside the frame there is a 28.8 × 18.9 in shelf and 13.0 in of clear height between the two panels.
01

Dimensions

Front and side elevations, measured to the outside of the chrome frame and to the inside of the tubes.

Dimension drawing of the USM Haller style coffee table: overall width 30.5 in, overall depth 20.6 in, overall height 14.7 in; inner width 28.8 in, inner depth 18.9 in, inner height 13.0 in
Overall width 30.5 in · 77.5 cm
Overall depth 20.6 in · 52.3 cm
Overall height 14.7 in · 37.3 cm
Inner width 28.8 in · 73.2 cm
Inner depth 18.9 in · 48.0 cm
Inner height 13.0 in · 33.0 cm
Weight 29.39 lb · 13.33 kg
Assembly About 80% pre-assembled; about 10 minutes, tool included

The inner measurements are the useful ones for styling: they give the size of the lower shelf and the clear height above it, for books, a basket or a folded throw.

02

Materials and finishes

Two powder-coated steel panels on a chrome-plated steel frame, joined at every corner by a chrome-plated brass ball.

Materials drawing of the USM Haller style coffee table: powder-coated steel panels in Golden Yellow RAL 1004, Pure White RAL 9010 or Graphite Black RAL 9011, a chrome-plated steel tube frame of 0.75 in diameter and chrome-plated brass ball connectors
Panels Powder-coated steel, tabletop and lower shelf
Frame Chrome-plated steel tube, ø0.75 in (19 mm)
Connectors Chrome-plated brass balls, ø25 mm, threaded M8 on six faces
Finishes Golden Yellow RAL 1004 · Pure White RAL 9010 · Graphite Black RAL 9011

Each table comes with both panels in one finish. The chrome frame and brass balls are the same on all three, so mixed colours sit well side by side.

USM Haller style coffee table in Golden Yellow

Golden Yellow · RAL 1004

USM Haller style coffee table in Graphite Black

Graphite Black · RAL 9011

USM Haller style coffee table in Pure White

Pure White · RAL 9010

03

In a mid-century living room

Large round paper lantern under oak ceiling beams above the Graphite Black USM Haller style coffee table, with a leather lounge chair and a white sofa
Graphite Black under an Akari washi paper pendant lamp. Rendered interior.

In this living room the Graphite Black table sits under a large paper lantern, between a low sofa and a leather lounge chair. Four proportions make the arrangement work:

  • DistanceLeave 16–18 in (40–45 cm) between the sofa and the table edge: close enough to reach a cup, with room for knees. Keep 30–36 in (76–91 cm) for walkways around it.
  • HeightAt 14.7 in (37.3 cm), the top sits a little below the seat of most sofas (16–18 in, 41–46 cm), the usual relationship for a coffee table.
  • LengthA coffee table is often about two-thirds the length of the sofa. At 30.5 in, this one suits a loveseat or a compact two-seat sofa; in front of a longer sofa, pair it with a side table or use two.
  • LightA large pendant centred over the table, as in these renders, gathers the seating group and keeps the floor clear.
Modern Mediterranean living room with a large paper lantern over the Graphite Black USM Haller style coffee table in front of a white sofa
The table centred under the lantern, in front of the sofa. Rendered interior.
Living room seen from the fireplace: a paper lantern over the Graphite Black USM Haller style coffee table, with a leather lounge chair and ottoman
Seen from the fireplace: the same table between the sofa and a leather lounge chair. Rendered interior.
04

Will it fit? Four checks

  1. Measure your sofa seat height. The top, at 14.7 in, should sit at or a little below it.
  2. Measure the sofa length. 30.5 in is about two-thirds of a 46 in loveseat.
  3. Mark 30.5 × 20.6 in on the floor with tape and check 16–18 in to the sofa and 30 in of walkway.
  4. Check what goes underneath: 13.0 in of clear height and a 28.8 × 18.9 in shelf.
05

Frequently asked questions

What are the dimensions of the USM Haller style coffee table?

It measures 30.5 in wide, 20.6 in deep and 14.7 in high (77.5 × 52.3 × 37.3 cm). Inside the frame the shelf is 28.8 × 18.9 in, with 13.0 in of clear height.

How far should a coffee table be from the sofa?

Usually 16–18 in (40–45 cm) from the sofa front, with 30–36 in (76–91 cm) left for walkways.

Is 14.7 in a good coffee table height?

Yes for most sofas: coffee tables are usually level with the seat or a little lower, and most sofa seats are 16–18 in high.

What is it made of?

Powder-coated steel panels, a chrome-plated steel tube frame of 0.75 in (19 mm) and chrome-plated brass ball connectors threaded M8 on six faces.

Order the coffee table

$301.22 $451.83 · free US shipping · 30-day returns

Arrives about 80% assembled with the assembly tool in the box; the last steps take about ten minutes.

Watch the assembly film · More USM Haller style furniture